News

Red, Yellow, X2 – What does it all mean and where can I use them in 2019…

📁 MyLaps Product News, Timing.ie News 🕔19.February 2019
Red, Yellow, X2 – What does it all mean and where can I use them in 2019…

Following some recent communication around issues with using ‘Yellow’ transponders at events not currently serviced by Timing.ie, we wanted to take the opportunity to bring some clarity to this matter and alleviate the concerns of a number of competitors.

In this article, we are going to focus on the Car, Kart & Motorbike (non-MX*) transponders offered from MyLaps, and which event types they can and/or cannot be used at.

 

AMB / MyLaps TranX Style Yellow Transponder:

This unit was developed for the Karting market, and as such is rated to a lower speed rating that will accurately support the timing of Karts. However, while the use of this unit is recommended primarily for Karts, the signal transmitted will work at car events if the transponder is fitted to the car in such a position that it has a clear sight of the ground as low as possible within the car. For example, Formula Vee and Legends typically have very little issue using these units.

At events timed by Timing.ie up to and including 2019, these transponders will be supported at Car, Motorbike (non-MX*) & Kart type events.

 

AMB / MyLaps TranX Style Red Transponder:

This unit was developed for the Car and Motorbike (non-MX*) market, and as such is rated to a much higher speed rating that will accurately support the timing of Cars and Motorbikes, traveling at high-speed. However, while the use of this unit is recommended for Cars and Motorbikes (non-MX*), the signal transmitted is more than capable of working at kart events also, and has always been the recommended future proof option for any competitor that has contacted us for advice on which transponder they should purchase.

At events timed by Timing.ie up to and including 2019, these transponders will be supported at Car, Motorbike (non-MX*) & Kart type events.

 

MyLaps X2 Yellow Kart Transponder:

This new generation unit was developed for the Karting market, and as such is rated to a lower speed rating that will accurately support the timing of Karts. Unlike its older predecessor however, this unit can ONLY be used at Kart type events, where the timers are using the X2 Timing Platform, as used by Timing.ie. This means that if you turn up to a Car or Motorbike type event, this transponder will not be suitable for you.

At events timed by Timing.ie up to and including 2019, these transponders will ONLY be supported at Kart type events.

 

MyLaps X2 Red Car/Bike Transponder:

This new generation unit was developed for the Car and Motorbike (non-MX*) market, and as such is rated to a much higher speed rating that will accurately support the timing of Cars and Motorbikes, traveling at high-speed. However, while the use of this unit is recommended for Cars and Motorbikes (non-MX*), the signal transmitted is more than capable of working at Kart type events also, and continues to be the recommended future proof option for any competitor that contacts us for advice on which transponder they should purchase.

At events timed by Timing.ie up to and including 2019, these transponders will be supported at Car, Motorbike (non-MX*) & Kart type events.

 

We certainly hope this clarifies the matter for all concerned. However, as one of the main Official MyLaps Partners in Ireland, Timing.ie is proud to offer advice to any competitor about the use of transponders and the different types available. We also have a full range of transponders in stock for the 2019 season. Please feel free to contact us for pricing and further information.

 

Note:
*MX refers to MotoCross. Competitors competing on these events require a specific model of transponder which is Orange in colour and not compatible with any of the above.

Share this article with friends

Similar Articles

Important update on X2 Transponder

Important update on X2 Transponder

It has come to the attention of MYLAPS that some of the Rechargeable X2 Transponders are not working according to

Read More